airffic/port-courier-x1

公开可飞行示例
关注312派生1星标2840
零件清单
机架Carbon composite VTOL wing, 2.4 m3.20 kg
动力T-Motor MN5008 ×4 (lift)1.52 kg
动力T-Motor AT4130 ×1 (cruise)410 g
电源12S 22000mAh solid-state battery ×25.60 kg
飞控CubePilot Cube Orange+ / ArduPlane 4.6180 g
飞控Here4 RTK GNSS ×2110 g
通信LTE + 920MHz redundant link140 g
载荷5 kg delivery pod (winch drop)1.90 kg

机体档案

Port Courier X1

A delivery VTOL built to carry 5 kg over 40 km from one rooftop drone port to another. As the reference airframe for Airffic World OS, its configurations, maintenance and flights are all public.

What it does

  • Takes off and lands vertically on rooftop ports (a 2.5 m square pad is enough)
  • Cruises as a fixed-wing; on schedule in headwinds up to 12 m/s
  • Lowers only the parcel by winch; the airframe never touches the ground

Configurations

  • standard year-round standard configuration
  • winter adds a battery heater and icing detection for low temperatures
  • medical-cold-chain with a cold pod that holds 2–8 °C

If you fork it

Fork it, change the configuration, and send it back as a mod. Good mods get merged into the reference airframe.

Max takeoff weight  24.9 kg
Range               40 km (with 5 kg)
Flight time         75 min